Three energy saving effects of the hottest steam t

2022-08-18
  • Detail

The three energy-saving functions of steam traps

there are many types of steam traps at present, but their working principle is to use the differences in the height, temperature and flow rate of steam and condensate to realize the opening and closing of steam traps through various mechanisms, so as to achieve the purpose of steam blocking and drainage. It has three main energy-saving effects

first, quickly discharge the condensed water generated in the steam using equipment, so that the heating efficiency of the steam using equipment can be maintained at the best state, so that the condensed water in the equipment does not form a stagnation. It is used in the tensile performance test of various industrial lifting belts to ensure the steam space in the equipment to the greatest extent, so that the highest heating efficiency can be maintained frequently. Once the steam trap can not fully play its role, due to the retention of condensate, not only the performance of steam equipment will be greatly affected, sometimes even the production equipment will be completely paralyzed

second, quickly discharge the air and low-temperature condensate in the equipment at the beginning of startup, so as to shorten the preheating operation time. When the steam is started, the steam transmission pipeline and steam using equipment are filled with air. If they are not eliminated, the steam cannot be sent. In addition, in the steam transmission pipeline and steam use, it is necessary to often inspect and measure the hydraulic main oil. In the process of heating up the equipment to the steam temperature, the initial low-temperature condensate produced should also be quickly discharged, so that the equipment can operate normally in a short time, which is an important condition to improve the production efficiency. The difficulty of implementing steel structure technology is caused by many factors, especially the intermittent production field. 13. If it is not convenient to combine, Because the preheating time is shortened, the operation time of each time is shortened. Because the processing times are increased, the output can be increased finally. In the past, during preheating operation, the bypass valve was first opened to discharge the initial air and low-temperature condensate. Now, due to the selection of appropriate steam traps, the initial air and low-temperature condensate can be discharged automatically, and manpower can be saved

third, reduce the steam consumption of the steam trap itself. The so-called steam consumption of the steam trap itself generally refers to the steam leakage, which is the sum of the steam volume and heat loss required by the steam trap action

Copyright © 2011 JIN SHI